Barrier 01 · Doors and standard openings
Dam Easy Ultimate
A removable door barrier that expands to fit the opening and seals with an inflatable rubber seal. Join barriers with extension poles to cover garages, patio doors and wider entrances.
Overview
The Ultimate is made of a centre piece and two side wings. A geared screw mechanism, driven by a ratchet handle, pushes the wings out to the sides of the door reveal. A patented inflatable rubber seal around the frame is then pumped up with the built-in hand pump, pressing the barrier against the reveal and threshold.
No tools are needed to put it in place, and it lifts out again for storage. Openings wider than 1100 mm use two or more barriers joined by extension poles. We confirm the layout for every opening at the site assessment.
Specifications
| Width per barrier | Adjustable, 780 to 1100 mm |
|---|---|
| Barrier height | 720 mm |
| Wider openings | Two or more barriers joined with extension poles |
| Main body | ABS2100, GR10 glass fibre reinforced |
| Inner mouldings | POM M90-44 polyacetal |
| Reinforcement | 304 stainless steel |
| Gear system | Brass |
| Compression seal | EPDM, 40 to 50 Shore A |
| Inflatable seal | Patented inflatable rubber tube seal |
| Operation | Geared ratchet handle extends the wings; built-in hand pump inflates the seal |
| Set-up | Under 5 minutes, no tools required (manufacturer figure) |
| Supplied with | Inflatable seal fitted, plus one spare seal |
| Standards stated | CE marked under 2006/42/EC (Machinery Directive) |
Source: the manufacturer's published product information. Figures are the manufacturer's own. Your quote confirms the configuration and warranty terms for your site.
Components
The Ultimate system is built from a few parts. Which ones you need depends on the width of each opening, which we measure on site.
-
Full barrier
Centre piece with two sliding wings, ratchet handle, inflatable seal, built-in pump and pressure gauge. Covers one opening from 780 to 1100 mm.
-
Mini barrier
A smaller barrier unit listed in the manufacturer's sizing tool for some multi-barrier layouts. Sizes confirmed on your quote.
-
Extension pole
Joins barriers side by side for garages, patio and French doors. Clips onto a metal rod set flush into a small cored hole in the ground.
-
Inflatable seal
The patented rubber tube seal around the frame. One is fitted and one spare is supplied with each barrier; replacements are available.
-
Compression seal
EPDM rubber seal on the barrier body, 40 to 50 Shore A.
Applications
Suits openings with a sound, even threshold and solid reveals for the wings to push against.
- Front, back and side entry doors
- Garage doors, using multiple barriers and extension poles
- Sliding, patio and French doors
- Shopfronts and small business entrances
Unusual reveals, damaged frames, uneven thresholds or water coming through walls, floors or drains need a closer look, and may suit a different system such as the Dam Easy Titan.
Photos and video
Installs across Queensland and NSW.
Is the Ultimate right for your openings?
Every job starts with a site assessment. We measure each opening, check thresholds and reveals, and quote the right layout.
Important: Our barriers are designed to help reduce water ingress through compatible openings when correctly sized, installed and deployed. No temporary barrier can guarantee protection in every flood. Performance depends on opening condition, flood depth, water velocity, debris, building condition, drainage and correct deployment.